Water flow is in-
termittent
Device overflows
3.
Check to see whether foreign materi-
al such as pet hair is interfering with
the pump rotor. Only clean the pump
rotor when the device is turned off!
1.
Check the water level and refill if
necessary.
2.
Hold the multifunction button briefly
to select Standard mode.
1.
Check to see whether the filter wrap-
per has been completely removed. If
not, remove the wrapper and place
the filter in the filter holder.
2.
Check to see whether the pump filter
is clogged or dirty. Clean or replace
the filter if necessary.
Please contact PetTec Customer Service at
info@pettec.de
if
none of these steps help!
