Page 53 of 88
User Guide
Petwalk Solutions GmbH & Co KG
10.2.5
SETTING OF DOOR FRAME ILLUMINATION
In the entrance area we have installed a light for our pets, which (if the pet door is open)
illuminates during the opening times. You can also adjust the brightness according to your needs
in 6 steps from 0 through 5. Ex works the maximum brightness is set (value 5).
To reach the setting mode of the petWALK pet door, press the Setup button twice rapidly
(double-click).
The display looks like this:
When using the
Up
and
Down
buttons in the settings menu you can scroll down to "
LIGH
"
at the display.
Now press the
OK
button to confirm the brightness mode. The display shows the currently
set brightness to you. The entrance light is lit with the appropriate brightness. Now you can use
the buttons
Up
and
Down
to find the brightness you desire. The entrance light will shine
in the appropriate brightness.
When you have chosen the appropiate birthness you can store it by means of the
OK
button.
From now on the entrance area will be lit in the now set brightness.
You leave the setting mode by pressing the
Setup
button or by pressing the
Operating Mode
button.
10.2.6
SETTING OF DOOR OPENING ANGLE
Ex works, the opening angle of the petWALK pet door is set at about 90 degrees. During your
installation it may happen, however, that you want to adjust this angle. Of course this is also
possible at our door by means of
learning mode
.
In this learning mode the door opens until an obstacle blocks it. The program will remember this
value and the next time will open only until shortly before this value (former obstacle). Of
course, you have the option to correct this "learned" value manually.
