10/18
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
CHECKS TO PERFORM BEFORE USE
The user must personally ensure that his vehicle is in
good condition. Certain safety elements may show signs
of damage even when the vehicle is not used. e.g.
prologned exposure to bad weather can lead to oxidation
in the braking system or a pressure drop in the tyres
which can have serious consequences. In addition to a
simple visual inspection, it is extremely important to
check the following points before use.
These checks only take a few minutes and
help to keep your vehicle in good condition,
for optimum use combining reliability and
safety.
If one if the elements in the checklist does not work
properly, ask your registered dealer to check it and have
it repaired if necessary before using the vehicle.
INSPECTION BEFORE SETTING OFF
ADVICE FOR STARTING UP AND DRIVING
WARNING
Before using the vehicle for the first time, make sure you are
familiar with all the controls and their respective uses. If you
are not sure about the functions of any of the controls, your
registered dealer can answer your questions and give you any
help you may require.
As exhaust fumes are toxic, the engine must be started in a
well-ventilated area. It must never be allowed to run in a closed
space, even for a short time.
STARTING THE ENGINE
For greater safety, place the vehicle on its central stand before
starting the engine.
•Ensure that the emergency stop button on the
handlebar is in the start position
.
•Ensure that the switch under the saddle is in
position UNLOCK.
• Turn the ignition key to "ON".
• Ensure that the throttle is in the OFF position.
• Press one of the brake levers while pressing the starter
button. Do not press the starter for more than 10 seconds.
• Release the starter button as soon as the engine starts.
If the engine does not start, release the starter
button and the brake lever, wait a few seconds
and try again.
To kick start, place the vehicle on its central stand.
• Turn the ignition key to "ON".
• Ensure that the throttle is in the OFF position.
• Grip the grab handle with your right hand.
• Operate the kick-start until the engine starts.
Component
Checks
Fuel
• Check the fuel level in the tank.
• Top up with fuel if necessary.
• Check that there is no fuel leak.
Engine oil
• Check the level of the engine oil.
• If necessary, top up with the
recommended oil.
Disk brakes
• Check brake operation.
• Have an approved dealer check
them if they feel soft.
• Check brake pad wear.
• Check the level of brake fluid in
the reservoir.
Lighting,
signalling,
indicators, horn
• Check operation.
• Correct if necessary.
Wheels and tyres
• Check the tyre wear and condition.
• Check the tyre pressures cold.
• Correct if necessary.
Throttle
• Check the throttle handle turns
smoothly and returns correctly to
its starting position.
Steering
• Check the free rotation of the
steering.
Stand
• Check that the central and side
stands can be unfolded smoothly.
• Operation of the ignition cut-out.
NOT_803628_TWEET-04A.mif Page 10 Jeudi, 30. juin 2016 10:37 10
Summary of Contents for TWEET 125 LW2CJ
Page 1: ......
