background image

 

Installation and Operating Instructions for Newbourne 35/40/50/60FS Multi Fuel Stoves 

Ref: Pevex1022/AH/ver1:May2015 

NEWBOURNE 35/40/50/60FS & PANORAMA RANGE 

WOOD AND MULTI FUEL FREE STANDING STOVES 

CE and EN13240 Approved 

 

 

APPROVED FOR USE IN SMOKE CONTROL AREAS WHEN 

BURNING DRY WOOD LOGS OR AUTHORISED FUELS 

Manufactured and Distributed by Pevex Enterprises Ltd

 

Unit MP7 Kirrawah Business Park, Waldringfield, Ipswich, IP12 4PR. 

Tel: 01473 736399 

Fax: 01473 736406 

Congratulations  on  the  purchase  of  your  new  Newbourne  stove.    Your  new  purchase  will  provide  you  with  a 
level of pleasure and comfort not previously experienced in your home. 

The Newbourne is a heavy duty British designed multifuel stove.  It has been designed for easy installation and 
ease  of  use  giving  a  lovely  flame  pattern  when  burning  wood  and  a  wonderful  warm  radiant  and  convection 
heat.  The stoves are highly efficient with a clean burn firebox and efficiencies above 80% (Net) when burning 
wood  and features  a curved  door, large  glass  window, vermiculite  insulated firebox, convector  top  plate,  bolt 
on adjustable feet, ergonomic handle and heavy weight steel construction. 

Please read and follow the advice and instructions on the safe and efficient operation of your stove to 
ensure  it  has  a  long  trouble  free  life  and  also  read  and  follow  the  installation  instructions  before 
installing the stove. 

 

PART 1 OPERATING INSTRUCTIONS 

A stove compared with an open fire is a very efficient heating appliance and must be installed and used safely 
and  wisely,  it  is  important  to  understand  the  working  of  such  an  appliance  and  to  understand  the  process  of 
converting the fuel into heat and its efficient transfer from the firebox to the room in order to gain the most from 
the stove. 

A stove creates an almost perfect environment to burn wood in.  The firebox will run at a very high temperature 
ideal to burn the volatiles given off in the burning process and the  precise air controls allow minimal heat loss 
into  the  flue.    Newbourne  stoveS  operates  at  an  efficiency  of  73  %

 

and  76%  on  a  Gross  CV  basis  (78-83% 

Net) and is very much more efficient than an open fire avoiding the wasteful draughts normally associated with 
that type of appliance 

Burning wood is the natural way to store the sun’s energy to then be released in a carbon neutral process to 
heat your house  when the need is  most.  On a cold  winters night there is nothing to  beat the  release  of heat 
and flame in a stove to raise the spirit. 

The  preparation  and  burning  of  wood  as  a fuel in stoves can  be  traced  back  many centuries, however it is  a 
forgotten  or  maybe  never  fully  discovered  activity  in  the  United  Kingdom,  we  have  much  to  learn  from  our 

Summary of Contents for NEWBOURNE 35FS











Reviews: