WOODBURNING STOVES
According to the Regulation No 305/2011
4. Manufactured and Distributed by
www.pevexstoves.co.uk sales@pevexstoves.co.uk
7. Declaration of performance
Harmonised technical specification
Emissions tested to EN16510 @ Nom output and 13% O2
CO %
Flue gas flow rate (g/s)
Nox (mg/Nm3)
OGC (mg/Nm3)
Dust (mg/Nm3)
8 . Fire safety
Reaction to fire
Test of fire safety in connection with burning of wood
Distance to combustibles
Rear (mm)
Sides (mm)
Front (mm)
9. Safety
Mechanical strength to support a chimney
Electrical
Surface temperature
Cleanability
10. Thermal output
Nominal heat output
kW
Energy efficiency
%
Flue gas temperature
deg C
Water heating
Signed on behalf of the manufacturer:
290
N/A
300
800
Newbourne 40i Inset Ecodesign
4.9
77
Adrian Hockley, MD 1/4/2019
5. The systems or systems for the assessment and verification of
constancy of construction product performance as set out in annex V
System 3
Strojirensky Zkusebni Ustav S.P. Notified No NB1015
6. Notified body relevant to the assessment and verification of
performance
Not tested
NPD
pass
pass
A1
Pass
175
EN13229:2002/A2: 2005
0.07
3. Intended use or uses of the construction products in according to
the technical specification
Pevex Enterprises Ltd, Unit MP7 Kirrawah Bus Park,
Newbourne Rd, Nr Woodbridge, IP12 4PR
DECLARATION OF PERFORMANCE
The performance for the products identified in point 2 is in conformity with the declared performance in point 7. This declaration
of performance has been issued under the sole responsibility of the manufacturer as identified in point 4 above.
1. Product type unique identification code
Wood burning stove - Requirements and test methods
pursuant to EN13229:2002/A2: 2005
2. Product name
Newbourne 40i Inset Ecodesign
Room heater burning wood without water heating
Newbourne 40i Inset
Ecodesign
6.2
121
80
37
