- 4 -
REVERSING THE DOOR OPENING OF YOUR WINE COOLER
The door of this appliance can be opened from either left or right side. The unit is delivered to you with
the door opening from left side (right-hinged).
PeVino recommend that reversing the door is done by a professional.
If you wish to reverse the door by yourself, please follow these instructions.
Notice: All parts being removed during this process is to be reused (except the top bracket)
1.
Remove the plastic plugs and keep them. They are to be reused on the other side. (There are
spare plugs in the supplied bag.)
2.
Remove the screws from the top hinge and lift the door from the bottom hinge. (carefully put
the door on a cloth to avoid scratching the glass).
3.
Remove the screw from the lower hinge and bring it to the opposite side.
4.
Now mount the door on the opposite side, using the EXTRA supplied bracket.
5.
After mounting the door, the top bracket must be adjusted back and forth in its clearance to fit
the door. The door must sit perfectly in level and flush with the cabinet. There must be the same
space in the top, bottom and sides.
6.
If the door's rubber gasket is not fitted tightly to the cabinet all around, the entire rubber gasket
can be completely removed, turned over and put back again.
7.
In rare cases, the rubber gasket may be so rigid that it needs to be massaged a little in order to fit.
Massage the rubber gasket outward while gently pulling the rubber gasket a few millimetres. A
hair dryer can be used to soften the rubber for increased flexibility.
