- 8 -
WATER TANK
In order to keep constant humidity level inside the cabinet, please ensure a certain volume of water in
the water tank. The ideal level is kept between the MAX (High) and MIN (Low) points indicated on the
water level monitor. Cleanse the water tank every 3 months and refill with fresh purified water.
IT IS STRONGLY RECOMMENDED TO USE PURIFIED WATER!
(DISTILLED, DEIONIZED OR SIMILAR)
INSTALLATION INSTRUCTIONS
Notes before installation.
•
Remove all the packing materials inside and outside the wine cooler.
•
The wine cooler must stand upright in a vertical position for at least 6 hours prior to power
connection, in order to avoid and prevent harm to the cooling system.
•
Clean the exterior of the cabinet with soft cloth soaked in warm water.
Attention points for installation.
•
This wine cooler is designed for free-standing or as built-in.
•
Please place the wine cooler on a solid ground suitable to support full load of wines.
•
Adjust the two supporting feet on the front of the wine cooler to make the cabinet at perfect
plumb and level.
•
Please do not place your cabinet close to heating appliances such as furnace, stove and radiator.
These items will increase power consumption of the cabinet.
•
Avoid installing the wine cooler in a damp and humid environment.
The more ventilation available around the wine cooler, the better the performance.
BUILT-IN DIAGRAM
Please follow this diagram if you want to insert the wine cooler into any solid structure.
It is important that the ventilation grille at the bottom front of the wine cooler is never covered. If a
plinth is to be mounted in front of the cabinet, make sure to drill holes or install a ventilation grille to
ensure proper ventilation.
