11
After the wine cooler is plugged in, if temp is not set, the figure of temp will be marked
automatically as 5
℃
(40
℉
) for upper chamber and 12
℃（
54
℉
）
for lower chamber.
The last setting temp will be memorized automatically by the system in the process of
normal operation in the event of power supply cutting or stopping.
SET（+/-）
button for temp setting
When setting temp on upper chamber, if temp range is between 5-8
℃
（
40-47
℉
）
, the
indicator below will be shown as orange, when the range between 9-12
℃
（
48-54
℉
）
,
the indicator below will be shown as white.
When setting temp on lower chamber, if temp range is between 12-14
℃
（
54-57
℉
）
, the indicator below will
be shown as white, when the range between 15-22
℃
（
48-72
℉
）
, the indicator below will be shown as
red.
Temp setting for both upper and lower chamber is circulation type, setting can be stopped when
temp reaches the target, the control system will have a judgement for 3 seconds, the
corresponding digital tube will flash. If temp setting remains unchanged for 3 seconds, the control
system will judge and confirmed the set temp, then returns to the indication of actual temp.
POWER
or OFF/ON This button controls starting and stopping of the software system. (the indicator for
POWER on control panel 3 indicates system in power)
℃/℉
this button can switch Fahrenheit to Celsius or vice versa, their temp indication are corresponding.
When switching, the corresponding indicator on the right corner of digital tube will start, and user can also
choose the procedure of memorizing Fahrenheit when starting operation.
Attention:
According to different habit of using the wine cooler among different countries or areas, users
can switch temp setting at will, only need to press the button “
℃
/
℉
”for 3 seconds
LIGHT
（
LAMP
）
This button can control starting and stopping of LED lighting.
