8
Avoid obstructing the internal fans (located inside on the back panel of the wine cooler).
Avoid pulling the shelves outwards beyond the fixed position due to risk of the bottles from falling.
Do not pull out more than one loaded shelf at a time as this may cause the wine cooler to tilt forward.
Do not cover the wooden shelves with aluminium foil or other materials, as it will obstruct air circulation.
Do not move your wine cooler while it is loaded with bottles. This might distort the cabinet of the wine cooler.
After the first loading
Please note that depending on the loading and settings chosen it takes about 24 hours for the wine cooler to see
the temperature stabilizing.
During this time the LED-temperature display seems to move erratically. This is normal and this process occurs
whenever the setting is modified and/or whenever a large number of bottles are added to the cellar.
TEMPERATURE SETTINGS
Important: The LED-display indicates by default the actual internal air temperature.
The electrical circuit board of all models comes with memory function. All settings will return to the pre-set
temperature after power is restored.
NOTICE!
It is important to understand that there is a difference between the air temperature inside the wine cooler and
the actual temperature of the wine.
Once the temperature is set, it is strongly advised to let it settle and not adjusting it frequently. You will need to
wait approximately 24 hours before noticing the effects of temperature adjustment due to the mass, volume and
density of a full wine cooler.
The thermostat will maintain the temperature inside the wine cooler within a +/- 2.5ºC range. But the thermal
inertia of the wine and the glass is such that within this temperature range, the actual temperature of the wine
will only fluctuate 0.5ºC to 1ºC.
