34
EN
pewag levo clamp LC
The following standards have been applied:
In accordance with Appendix VI of Directive 2011/65/EU on
the restriction of the use of certain hazardous substances
in electrical and electronic equipment:
We declare under our sole responsibility that the product
for which this operating manual is valid complies with the
regulations of Directive 2011/65/EU of the European Parliament
and the Council from 8 June 2011 of the use of certain
hazardous substances in electrical and electronic equipment.
Any modifications carried out on the product that were
not authorised in advance by pewag shall result in these
declarations losing their validity.
Prior to using this product for the first time, the operations
manual must have been read and understand in full.
Graz, 01/09/2018
pewag austria GmbH
ppa. Stefan Duller
14. Appendix
14.1 Load diagram (working load limits)
The load diagram shows that if the lifting process is done in an
angle greater 45° the working load limited reduces by 50 %.
Mechanical components Electrical/electronic
components
Charging
station
ISO 9001
ISO 12100
EN 61000-4-8 IEC 60335:1
IEC 60335:2
EN 13155
ISO 13849-1
EN 61000-6-4 EN 55014-1
EN 10204 3.1.B
ISO 13849-2
EN 61000-6-2 EN 55014-2
Machinery Directive
2006/42/EG
EN 55011/22
FCC, 47 CFR
Part 15
EN 6100-3-2
ASME B30.20
EN 61000-4-2 EN 300220-2
EN 6100-3-3
UL 508
EN 61000-4-3 IC RSS-247
CSA C22.2 No. 14-13
