Rev.: 2004-001-DE
8
3 Important safeguards
Before turning on the welding device, please, read this operating instructions as well
as the relevant safety and processing directions carefully.
Warning! With the use of electric tools you have to note the following basic
safety direction to protect against electric shock, injury and fire.
1. Keep your working area in order !
Disorder involves a certain danger.
2. Consider the influence of environment !
Do not expose electro tools to rain. Do not use electro tools in wet or damp surroundings or in the
neighbourhood of combustible liquids or gases.
3. Protect yourself against electric shock !
Avoid body contact with grounded components (e.g. radiators, metal pipes) or live cables. Do not carry
the device, with the finger on the power switch. Pull out the plug when you do not use the tool or when
changing the adapters and attachments.
4. Keep unauthorized people and children away !
Do not allow other people touch the device or cables – keep them away from your working place.
5. Store up your device safely !
Unused machines should be kept in a dry and locked room, inaccessible for children and unauthorized
people.
6. Use permitted accessories only!
Do only use accessories, especially current sources and lengthening cables, that are stated in the
operating instructions or recommended by us. The use of attachments, that are not stated in the
operating instructions, involves a certain danger for you. Do only use permitted and marked
lengthening cables outdoors.
7. Do not expose the cables to avoidable loads !
Do not carry the machine with the cable and do not use the cable to pull out the plug. Protect the
cables against heat, oil and sharp edges.
8. Lock after your tools carefully !
Keep your device clean. Follow the servicing instructions and the instructions for changing the tools.
Keep oil and grease away from the straps.
9. Check your device for damages !
Check your tools before every use for damages and function of the protection devices and machine
parts. All parts have to be mounted in the right way. They have to fulfil all conditions for a impeccable
running of the tool. Damaged protection devices and machine parts have to be repaired or replaced by
an authorized service point.
Summary of Contents for Polymatic
Page 2: ...Rev 2004 001 DE 2...
Page 23: ...Rev 2004 001 DE 23 9 Conformity Declaration...
Page 24: ...Rev 2004 001 DE 24...
