Adjustment
50
Fig. 13 - 44
O
Move the feed dog setting gauge under the presser foot with the cutout down and fit the
presser foot.
O
Loosen the nut
1
and unscrew the screw
2
a few turns.
O
Move the knee lever to the right until it stops and hold firmly, making sure that the
presser foot does not lift off the feed dog setting gauge.
O
Screw in the screw
2
until it stops, then unscrew it by one turn.
O
Tighten the nut
1
.
13
.05.43
Knee lever travel limit
Rule
The hand lever should lower automatically and the presser foot should have lifted
7 mm
off the needle plate when the knee lever is activated.
2
1
7 mm
Summary of Contents for 937
Page 61: ...Notes ...
