11 - 24
Adjustment
●
Loosen screws
2
.
●
Move knife 3
3
3
3
3 in such a way that it cannot collide with thread catcher
4
.
●
Taking care to ensure that screw
1
is loosened, manually turn thread catcher
4
in
accordance with
requirement 2
.
●
Bring knife
3
to rest against thread catcher
4
and align it in accordance with
requirement 1.
●
In this position tighten screws
2
.
Screw 1 remains loosened for the following adjustment.
Fig. 11 - 22
4
3 mm
5
2
3
1
11
.05.11
Knife
Requirement
1. The elongated hole of knife
3
must be parallel to knife carrier
5
and the knife must not
be touching the casting (see arrow).
2. When the point of needle catcher
4
protrudes approx.
3 mm
over the cutting edge of
the knife, knife
3
must just touch thread catcher
4
.
