Preparation
9 - 3
9
.03
Inserting/removing the bobbin case
Turn off the machine!
Danger of injury if the machine
is switched on suddenly!
Removing the bobbin case:
●
Open latch
1
and remove bobbin case
2
.
Inserting the bobbin case:
●
Press the bobbin case
2
until you feel it
engage in the bobbin.
9
.04
Threading the bobbin case / Adjusting the bobbin thread tension
●
Insert the bobbin into the bobbin case
1
.
●
Pass the thread through the slot under
spring
2
.
●
Pass the thread through the notch.
●
Adjust the thread tension by turning
screw
3
.
When the thread is pulled, the
bobbin must rotate in the
direction of the arrow.
2
3
-
+
1
5 cm
Fig. 9 - 04
1
Fig. 9 - 03
2
