Controls
7 - 4
Starttack on/off
●
With this key the starttacks can be switched on or off.
When the LED is on, starttacks are sewn.
Endtack on/off
●
With this key the endtacks can be switched on or off.
When the LED is on, endtacks are sewn.
Backtack suppression
●
Press the key
once
:
starttacks are not sewn.
●
Press the key
twice
: start- and endtacks are not sewn
Program key
●
When this key is activated (LED is on), a ”program” (stitch length values) can be entered
and selected with the knee switch.
Parameter input
●
After this function has been activated (LED is on) you are in the parameter input function.
After the function has been switched off, you return to sewing mode.
Keys F1 – F5
●
These keys have no function in sewing mode.
●
When the code number is entered, these keys correspond to the numbers 1 – 5.
Needle position
●
The needle position can be selected with this key.
When the function is switched on (LED on): The needle positions at t.d.c. when sewing stops.
When the function is switched off (LED off): The needle positions at b.d.c. when sewing stops.
●
When the code number is entered, this key corresponds to number 6.
Presser foot position when sewing stops
●
The position of the presser foot when sewing stops can be selected with this key.
When the function is switched on (LED on): The presser foot is raised when sewing stops.
When the function is switched off (LED off): The presser foot is lowered when sewing stops.
●
When the code number is entered, this key corresponds to number 7.
Presser foot position after thread trimming
●
The position of the presser foot after thread trimming can be selected with this key.
When the function is switched on (LED on): The presser foot is raised after thread trimming.
When the function is switched off (LED off): The presser foot is lowered after thread trimming.
●
When the code number is entered, this key corresponds to number 8.
Thread trimmer on/off
●
With this key the thread trimmer can be switched on or off.
When the LED is on, the thread can be trimmed with the pedal function.
●
When the code number is entered, this key corresponds to number 9.
Enter key
●
This key has no function in sewing mode.
●
When the code number is entered, the number sequence is taken over by pressing this key
( enter function ).
to
