Set-up
26
Fig. 9 - 03
9
.03
Threading the looper thread / adjusting the looper thread
Switch off the machine!
Risk of injury due to accidental machine start-up!
Open the hook room cover and side cover.
Slide the lever
4
to the left; this unlocks the hook bracket and it can be swivelled out.
Thread the looper thread as shown in Fig.
9
-
03
.
Use tweezers to thread in the thread on the hook
2
.
Slide the lever
4
to the left, swivel the hook bracket back in until it engages.
Adjust the looper thread tension by turning the knurled thumb screw
3
.
3
4
2
