Production
38
Function group 600:
Service
601
Move puller stepping motor
602
Inputs: 0123456789ABCDEF
0: free (E1 – X5.1)
1: free (E2 – X5.2)
2: free (E3 – X5.3)
3: free (E4 – X5.4)
4: free (E5 – X5.5)
5: free (E6 – X5.14)
6: free (E7 – X5.15)
7: free (E8 – X5.16)
8: free (E9 – X5.9)
9: free (E10 – X5.10)
A: free (E11 – X5:11)
B: Needle thread monitor, left (E12 – X5.12)
C: Bobbin thread monitor, right (E13 – X5.13)
D: Skip stitch light barrier (E14 – X5.8)
E: Tape cutter light barrier (E15 – X5.6)
F: free (E16 – X5.7)
603
Outputs:
1: Presser foot (X13.1 and X13.2) (1: up, 0: down)
2: Tape cutter (X13.3 and X13.4) (1: down, 0: up)
3: Needle cooling (X13.5)
4: Thread tension (X13.6) (1: open, 0: close)
5: Skip stitch generation (X13.7) (1: on, 0: off)
6: Raise transport puller (X13.8) (1: up, 0: down)
7: Raise cutting puller (X13.9) (1: up, 0: down)
8: free (X13.10)
9: free (X13.11)
10: free (X13.12)
11: free (X13.13)
12: free (X13.25)
13: free (X13.24)
14: free (X13.16)
15: Sewing motor running (X5.17) ( 1: running, 0: at a
standstill)
16: free (X5.18)
