background image

Embr

oidering

Getting started embroidering

1.  Attaching the embroidery unit, the machine 

automatically switches to embroidery mode 

and opens the load menu.

2.  Make sure that the USB embroidery stick 

is connected. Select a design from the USB 

embroidery stick and press OK to load to 

embroidery stitch-out.

3.  The design is placed in the center of the hoop. 
4.  Make sure the IDT is disengaged and snap 

on the embroidery foot. Insert a bobbin with 

lightweight bobbin thread.

5.  Hoop a piece of fabric and stabilizer, and slide 

on the hoop.

6.  Thread the machine with the 

À

 rst color in the 

color list.

7. Clear 

suf

À

 cient space to accommodate 

movement of the embroidery arm and the 

hoop. Hold the needle thread and press the 

start/stop button or the foot control. The 

machine starts embroidering and jump stitches 

will automatically be cut.

 

Note: Cut jump stitches is activated by default. 

Open the settings menu to deactivate this setting.

8. When 

the 

À

 rst color is completed, your 

machine stops. A pop-up appears asking you 

to change color. Re-thread with the next color 

and continue embroidering by pressing start/

stop.

 

Each color segment is tied off at the end and 

the needle thread is cut.

9.  When the embroidery is completed, your 

machine cuts the needle and bobbin thread 

and stops. The needle and presser foot raise 

automatically for easy removal of the hoop. 

 

A pop-up informs you that your embroidery is 

À

 nished.

6:6

Summary of Contents for CREATIVE 2.0 -





































































Reviews: