Sewing
10
Sewing a test seam
●
Press the
PM key
twice to move to the beginning of the program.
The previously created program appears on the display with seam segment 1.
2x
●
With the corresponding
+/- key
, select the seam segment """""
3
""""".
●
With the corresponding
+/- key
, enter the value "
20
" for the number of stitches.
●
Press the programmed
stop
key to switch on the function.
●
By pressing the
raise foot after seam segment
key, switch on the function.
●
With the corresponding
+/- key
, select the seam segment "
4
".
●
With the corresponding
+/- key
, enter the value "
10
" for the number of stitches.
●
Press the
end backtacks
key to switch on the backtacking stitch function at the end of
the seam.
●
Press the programmed
stop
key to switch on the function.
●
By pressing the
raise foot after seam segment
key, switch on the function.
●
Press the
thread trimming
key to switch on the function.
The program end is recognized automatically through the
thread trimming
function.
●
Sew the test seams by using the pedal functions.
1
3
20
PM
1
4
10
PM
1
1
20
PM
