Pfaff HD SCREEN, Manual

3:8

A

B

C

Pf

aff HD scr

een

 Settings menu

In the Settings menu, you can override automatic 

settings and make manual adjustments to the 

machine settings (A), sound settings (B) and screen 

and light settings (C). 
Touch the icons to activate a function or open a 

list of choices. The settings are saved even after 

turning off the machine.

 Machine settings (A)

 Owner’s name

Touch the icon to get a pop-up where you can enter 

your name.

  Twin needle

Touch the icon to open a list for twin needle width 

selections. When a twin needle size is selected, the 

width of all stitches is limited for that needle size to 

prevent needle breakage. The setting is kept until 

you deselect the twin needle width. 
When a twin needle size is selected, a pop-up is 

shown when turning on your machine. Another 

warning pop-up is shown when selecting a stitch 

that is too wide for the set twin needle size. The 

stitch width of those stitches is automatically 

adjusted to 

fi

 t the twin needle. Deselect twin needle 

to go back to normal sewing.

  Stitch width safety

Select this function when using a straight stitch 

stitch plate or a straight stitch presser foot to lock 

the center needle position for all stitches to prevent 

damage to the needle, presser foot or stitch plate.
When turning on the machine with this setting 

activated and for every stitch selection that is not 

a straight stitch, a pop-up informs you that it is set 

to straight stitch. Deselect stitch width safety to go 

back to normal sewing.

Note: Twin needle and stitch width safety cannot be 

used at the same time.

  Beading foot

The beading foot setting will make sure that the 

tie-off is not made in the center position, where it 

might hit a pearl. You will 

fi

 nd beading stitches in 

stitch category 6.2.
Deselect the beading foot setting to go back to 

normal sewing.

Pop-up for twin 

needle selection.