GB
Worm gear screw jack SHE type1 and type2
High-performance screw jack HSE type1 and type2
T13.01.000.0000.0003
2019/04 Rev. Index E
Subject to technical modifications
Design changes under reserve
Sous réserve de modifications techniques !
5
1.2.1 Marking in accordance with RL 2014/34/EC
Gas
II 2G
ck Ex h
IIB T4
Gb U
Dust
II 2D c
Ex h
IIIB 135°C Db U
Ex-Symbol
Device group
Category
Ignition protection type
Equipment protection level (EPL)
Explosion group
Temperature class
Max. surface temperature
Equipment protection level
Equipment with partial certifikate,
CE Compliance is certified with Installation in a complete Equipment
2
Accident prevention guide
Observe the relevant instructions, regulations, and standards in the country of use. In Germany, these are
currently:
Rules and regulations
EC machinery directive
2006/42/EC
Machine safety
DIN EN ISO 12100:2010
Lift devices
DIN EN 1494:2009-05
Lifting tables
DIN EN 1570-1:2015-01
Elevating work platforms
DIN EN 280:2014-02
Loading platforms
DINEN 1756
Vehicle lifts
DIN EN 1493:2011-02
Stages and studios
BGV C1
Stage mechanics, safety equipment
DIN 56950-1:2012-05
EC guideline; Equipment and protective systems in potetially
explosive atmospheres (ATEX)
2014/34/EU
EC guideline; Improving the safety and health protection in
potentially explosive atmospheres
1999/92/EG (ATEX 137)
Explosion protection basics and methodology
DIN EN 1127-1
Non-electric devices for use in explosive-atmosphere zones -
basics and requirements
DIN EN ISO 80079-36
Non-electric devices for use in explosive-atmosphere zones -
protection through constructional safety “c”,
ignition source
monitoring "b";
liquid encapsulation “k”
DIN EN ISO 80079-37
Explosive atmosphere
DIN EN 60079-0
Explosive atmosphere, projection, selection and set-up of
electrical systems
DIN EN 60079-14
