27
Setting up
8
.02
Winding the bobbin thread, regulating the winder tension
●
Draw the thread from the reel stand through guide hole
1
into the bobbin winder tension
unit
2
and then behind the thread clamp
3.
●
Cut off the thread in thread clamp
3.
The thread is retained.
●
Place empty bobbin
4
on the bobbin winder spindle.
●
To switch on the bobbin winder, push up lever
6.
The bobbin is wound during sewing.
●
The bobbin winder stops automatically, when the bobbin
4
is fi lled suffi ciently.
●
Remove full bobbin
4
and cut off the thread in thread clamp
3.
●
The tension of the thread on bobbin
4
can be adjusted on the bobbin winder tension unit
2.
●
The volume of thread on bobbin
4
can be adjusted with screw
7.
Fig. 8 -02
4
5
3
6
7
1
2
Summary of Contents for PowerLine 2235
Page 35: ...Note ...
