47
Controls
Key
3
:
Needle position change
(under Parameter
695
other functions can be assigned to this key)
Set
value
1 = needle raised without trimming
2
=
needle
position
change
3
=
single
stitch
4
=
single
stitch
in
reverse
5 = moving forwards to needle position step by step
6 = programmable tack on / off
7 = proceed to next sewing range
Key
4
:
Calling up the pre-selected top feed lift
(Diode on =
2
nd lift, diode off = standard lift)
This button is without function in the model PFAFF 3741.
Key
5
:
Bartack suppression for one bartack
(under
Parameter
780
other functions can be assigned to this key)
Set value
1 = tack inversion (once)
2 = tack suppression (all tacks switched off)
3 = reverse move to needle position stepby step
4 = Edge trimmer on /off
5 = programmable tack on / off
Key
6
:
Calling up the pre-selected stitch length
(Diode on =
2
nd stitch length, diode off = standard stitch length
Key
7
: Threading
aid
Needle rises without thread trimming, thread clamp is opened, thread
tension is released and the motor start inhibitor is activated.
If the key is operated again, the motor start inhibitor is deactivated.
Key
8
: EMERGENCY
key
Needle rises without thread trimming, thread clamp is opened, thread
tension is released, presser foot is raised and the motor start inhibitor is
activated. If the key is operated again, the motor start inhibitor is deactivated.
The method for setting parameters is described in the settings manual,
and may only be carried out by certifi ed professionals!
Summary of Contents for POWERLINE 3741
