Sewing
67
End of the seam sector
The symbol shows the type of recognition at the end of the seam sector (here, for example,
recognition through knee switch operation). The specifi cation is made during the seam pro-
gram input, see Short Instructions for the input.
Action at end of the seam sector
The symbol shows the action at the end of the seam sector (here, for example, condensed
stitches). The action for the end of the seam sector is specifi ed during the seam program in-
put, see Short Instructions for the input.
Thread trimming on / off
This function is used to switch the thread trimming function at the end of the seam sector
on or off.
Print label on / off
This function is used to switch the label printing function at the end of the seam sector on or
off.
Selection of the operating mode
This function is used to call up the menu for selecting the operating mode.
Back
This function is used to call up the last level.
Display of the sewing results
In sector 5 both the number of good (“ok”) and bad (“nok”) seams are displayed.
Manual interruption
The seam cycle is interrupted. To continue the seam program, the seam sector can be re-se-
lected.
Manual sewing
Sewing takes place without fi xed seam sectors. The characteristics of the thread strength
during sewing can be displayed (monitor on/off) and saved (frozen) temporarily as a
snapshot.
Test seam
After this function has been selected, a test seam (simulated docu-seam) is sewn to check
all specifi cations. No label is printed and no identifi cation number is recorded in the databa-
se.
Bobbin winding
( only on the PFAFF 3745 PREMIUM)
The winding operating is carried out, see Chapter 7
.
04 Winding the bobbin thread…
Help mode
After the help mode has been selected, the next function selected is described.
Choice of language
A menu for selecting the language setting is opened, see Chapter 7
Setting up in the instruc-
tion manual.
Summary of Contents for POWERLINE 3741
