English
Service Jack SILVERLINE HRH S
F 06.01.175
technische Änderungen vorbehalten
design changes under reserve
changements techniques sous réserve
8 / 12
Daily examinations
Visual and function examination of the security parts: head, non-return valve, pressure control
valve, drain valve.
Have the jack serviced by a qualified technician at least once a year.
Observe the inspection and servicing schedule.
Note that safe functioning cannot be guaranteed unless original accessories and spares are used.
Technical data
Type
HRH S 2,0 K HRH S 2,5 K HRH S 2,0 L HRH S 3,0 L HRH S 5,0 L
Ref.-no.:
040008530 040008531 040008532 040008533 040008534
Lifting capacity
[t]
2
2,5
2
3
5
Lift
[mm]
260
300
660 480
415
Quick lift
no
yes
yes
yes
yes
min. height
h
min
[mm]
125
140
140 125
145
max. height
h
max
[mm]
385
440
800 605
560
Lift per pump stroke
[mm]
8,12
5,9
14,6
17,7
12,2
Functional description
The term “service jack” refers to a manually operated, transportable hydraulic lifting device.
A rotary load supporting plate supports the load.
The load is lifted by a swivelling load arm, which is mounted in the base frame on an articulated joint.
A hydraulic pumping device involving a lifting piston, non-return valve, overpressure valve, and lowering device for
the controlled release of the raised load performs the lifting process.
The jack has four rollers to enable the user to transport it easily
without a load
.
Operating precautions:
Note:
Use the jack only on adequately compacted (stable) ground.
The jack must not be used to transport loads.
Ensure that the jacking handle has room to move freely.
Use additional supports for working under the raised load.
Placing into operation
design „L“ 3t; 5t
design „L“ 2t
at design „L“
only at
design „L“ 2t
Remove the transportation
safety device and lift up the
pump lever support
Remove the transporta-
tion safety device
Insert the
pump lever
and fasten it with screw
and nut
Fasten the
quick lift operating
lever
with bolt and nut
Operating instructions
Never use the service jack as transporting device.
Park the vehicle you wish to lift on flat, compacted ground.
Chock the raised vehicle to ensure that it cannot roll away, slip, or otherwise fall off the jack.
The device should be located under the jacking points provided for the purpose by the vehicle
manufacturer and not under the vehicle directly.
The load support plate must be positioned centrally under the jacking point.
If necessary, use a non-slip, resilient surface.
If necessary use a non-slip, elastic
