Operating instructions CWB-ATEX
120799 61 616 07 300 0
05/2021
Page 4 / 14
30046-005k
en
2.3 Symbols on the device
Symbol
Meaning
0344
CE marking according to the current applicable directive.
02198E00
According to marking, device certified for hazardous areas.
15649E00
Input
15648E00
Output
3 Safety notes
3.1 Operating instructions storage
• Read the operating instructions carefully.
• Store the operating instructions at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2 Safe use
Before mounting
• Read and observe the safety notes in these operating instructions!
• Ensure that the contents of these operating instructions are fully understood by
the personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• We cannot be held liable for damage to the device caused by incorrect or unau-
thorised use or non-compliance with these operating instructions.
For assembly and installation
• Observe national assembly and installation regulations (e.g. IEC/EN 60079-14).
• Observe national safety and accident prevention regulations.
• During installation and operation, observe the information (characteristic values
and rated operating conditions) on the type plates and data plates and information
signs located on the device.
• Before installation, make sure that the device is not damaged.
Maintenance, repair, commissioning
• Before commissioning, make sure that the device is not damaged.
• Work on the device, such as installation, maintenance, overhaul, repair, may only
be carried out by appropriately authorised and trained personnel.
• Perform only maintenance work or repair described in these operating instruc-
tions.
