685408014B
10
1 Hints on the manual
This handbook contains instructions for the installation and
operation of door and side-mounted,
bolt-on
Cooling
Series Units provide by Pfannenberg (PCN).
Hint
The technical specifications for each machine along with
additional information on assembly, connections and
operation are contained in a separate sheet.
In this manual, safety recommendations and other
information are structured as follows:
Hazard!
If the measures described in the following are not
strictly observed there is danger to life and health.
Hazard!
If the measures described in the following are not
strictly observed there is danger to life and health
due to electrical shock.
CAUTION:
If the measures described in the following are not
strictly observed material damage may be caused.
Hint
A hint contains additional information on the action or
instruction described.
2 Handling
2.1 Transport
• Lift cooling unit only by the casing or with two jack rings
(M8 jack rings is not included)
•Transport the cooling unit only in condition of usage.
•Prior to transport remove the cooling unit and pack it
separately if the complete switch cabinet is to be
transported.
Failure to observe these instructions will render the
warranty provisions null and void.
2.2 Storage
• Never expose cooling units to temperatures exceeding
+70 °
C during storage.
• Store cooling unit only in condition of usage.
Failure to observe these instructions will render the
warranty provisions null and void.
2.3 Unpacking
•During unpacking make a visual inspection of the cooling
unit to see whether any damage has occurred during
transport. Especially pay attention to loose parts, dents,
scratches, visible loss of oil etc.
Any damage must be reported immediately to the
forwarding agent (follow the instructions in "Rules for
Damage Claims"). Moreover, the latest edition of the
"Pfannenberg After Sales Service Declaration" shall
apply.
•Before disposing of packing material ensure that it does
not contain any loose components.
Danger!
Burr caused by production may be present on the metal
edges of the unit. Always wear protective gloves when
carrying out maintenance work and installation.
In case of a warranty claim exact details on the fault
(photograph, if possible) and the indication of type and
serial number of the cooling unit are required.
3 Scope of delivery and options
The Scope of delivery includes:
• Cooling unit
• Enclosed package (among other things, fastening
material, electrical plug-type connectors)
• Special accessories, if applicable
•
Technical Datasheet
•
Manual
4 General Information
• Old devices can be properly disposed of by
Pfannenberg.
They must be sent to one of our works shipment/postage
paid.
• All cooling units produced by
Pfannenberg
are free
from
–
PCT
–
Asbestos
–
Formaldehyde
–
Cadmium
–
Substances impairing wetting.
•Every cooling unit is checked to ensure that it is tight
Read this manual completely and carefully
before installing the unit.
This manual is an integral part of the scope
of delivery and must be kept until is
Disposed.
