4
5
6
90°
Reassembly
Distortion of the measurement results with non-compliant analyzer cell
When it leaves the factory, the analysis cell is configured for the product in which it is instal-
led.
The use of an analysis cell different from the original component requires adjustments.
Without these settings, the measurements made by the product are not correct. Only a
Pfeiffer Vacuum service center can make these adjustments.
It is mandatory to reassemble the original analysis cell.
4 N·m
1
5
3
4
6
2
4
3
90°
1
2
The reassembled analyzer cell is the original analyzer cell of the detector, which was previously
dismantled.
Service - Maintenance
15/30
