36
www.pfisterer.com
Drawings not to scale - for information only Size 3 | 3-S / Standard instructions wire screen / No. 040 371 001 (2014-05-08) i-01
8.8
Thick conducting layer (Diameter > 2 mm)
Remove outer jacket to 40 mm behind the „jacket cut“ (1).
1
1
Remove swellable tape and bend screen wires back.
2
1
1
Bend back screen wires for peeling.
3
1
60
1
1
Installation / Assembly
VIII
Peel semiconductor layer using the peeling device to 60 mm in front of
the outer jacket (note instructions for the peeling device).
4
1
Re-apply the screen wires.
5
1
Apply woven insulating tape up to 40 mm in front of the "jacket cut" (1)
with a 50 % overlap.
6
1
At the "jacket cut" (1), apply 2–3 more layers.
7
1
Wrap around screen wires and secure with insulating tape.
8
1
Wrap screen wires in parallel, without crossing over!
Tap down screen wires at the "jacket cut" (1) and either side of the
sealing tape.
9
1
Go to Step 18 in Section 8.2, page 22.
10
1
Summary of Contents for MV-CONNEX 3
Page 2: ...2 www pfisterer com...
