15710-0004 | Rev C | 2018-04-01 | e-mail psd@pflow.com
Section 2 | 1
Section 2 |
General Information
www.pflow.com
P 414 352 9000
F 414 352 9002
6720 N. Teutonia Ave.
Milwaukee, WI 53209
This manual provides information about the PFlow Industries, Inc. custom designed
Vertical Reciprocating Conveyor (VRC). As the nations’ leading manufacturer of
vertical material handling equipment, PFlow Industries, Inc. is confident that this
new VRC will provide many years of reliable service.
The VRC provides a safe and simple means of moving material from one level to
another. The simplicity of design and few moving components ensure a trouble-free,
long life, with low maintenance and little downtime.
This VRC is designed for the movement of materials only, up to the VRC’s rated capacity,
from one level to the next. Do not allow anyone to ride on the VRC.
VRCs are
not
elevators, and are specifically excluded within the scope of the ASME A17.1 Safety
Code for Elevators and Escalators. VRCs are included in ASME B20.1 Safety Standard
for Conveyors and Related Equipment, which is incorporated by reference into OSHA
29 CFR 1910. A copy of the ASME B20.1 standard can be purchased at
www.asme.org and other sources. PFlow Industries, Inc. recommends that this
standard be referenced for appropriate installation, maintenance, inspection,
and operation in relation to hazards. All electrical designs and components are in
accordance with National Electric Code (NEC) requirements. Local codes may
require initial inspection of the installation and periodic inspection and testing of the
unit. Contact PFlow Industries, Inc. for more information in the event an inspection
is required.
The information and illustrations in this manual are intended only as an aid to understanding
the VRCs general installation. The information and illustrations do not cover every possible
contingency or circumstance regarding nonstandard options or site conditions.
If there is a problem, call PFlow Industries, Inc. at (414) 352-9000, during normal
business hours, 8:30 a.m. to 5:00 p.m. central standard time, Monday through
Friday. Outside of those hours, see the PFlow Industries, Inc. Contact Information
page for additional information. Use the model number and serial number or the
PFlow Industries, Inc. General Arrangement (GA) drawing number for the lift in
all correspondence.
Equipment damage resulting from modification in any manner from the original
model, including the substitution of parts other than factory authorized parts, will
void the warranty. Furthermore, PFlow Industries, Inc. will not be liable for any loss,
injury, or damage to persons or property, nor for direct, indirect, or consequential
damage of any kind resulting from modified or substitution of parts other than
factory authorized parts of said material or equipment.
PFlow Industries, Inc. maintains a complete stock of, or has access to, all replacement
components. Detailed records of all equipment sold are kept. If a component is
damaged in shipment, is defective or missing, contact PFlow Industries immediately.
The PFlow Industries, Inc. Product Support Department will assist maintenance
and service personnel with any questions or problems regarding the equipment
or installation.
Your feedback is important. Please help PFlow Industries, Inc. understand if the
equipment has met your expectations. Please complete the questionnaire in this
manual. The questionnaire will help us address any comments and/or concerns.
Introduction
General
Overview
Code
Requirements
Parts
Service
Feedback
NOTE
