_5HY__HPDLOSVG#SÁRZFRP
6HFWLRQ_
Section 10 |
125'0RWRU,GHQWLÀFDWLRQ
DQG2SHUDWLRQ
www.pflow.com
P 414 352 9000
F 414 352 9002
6720 N. Teutonia Ave.
Milwaukee, WI 53209
The spring-applied brake was produced in accordance with the following EC
directives and standards:
- EC Directive Machinery (2006/42 EC)
- EN ISO 12100-1 and 12100-2: Safety of Machinery (Basic Concepts)
- EC Directive Electromagnetic Compatibility (2004/108 EG). Compliance
with this directive has to be safeguarded with the appropriate switchgear of
the user.
The spring-applied brake is not an independently operable machine but
intended to be installed in other machinery. Its commissioning is prohibited
until the establishment is reached that the machines comply with the
provisions of the EC Directive.
The lettering of the spring-pressure brake includes important data. This data
and the contractual provisions for the brakes establish the limits of use.
Lettering on the brake housing:
103V 12 09 40
Braking torque in Nm
Year of manufacture
Month of manufacture
Operating voltage (DC) in Volt
FDB 15 N H F R T S M 20 H7 24 VDC
Operating voltage
Hub bore
Micro switch
Dust guard ring
Tapped
bores
for encoder mounting
1)
Friction plate
Flange
Manual release
without code:
Operating noise-damped
Brake type: N = standard; C = adjustable
Brake size (08, 10, 13, 15, 17, 20, 23, 26, 30, 40)
Brake designation (series)
1)
only available on Design
N
* Options I must be requested at the time of order (e.g., by using the code)
** Option II is the only option for the
FDB
series. This option, if required,
must be indicated at the time of order and is not retrofittable. Instructions
for the micro switch must be observed.
Directive and
Standards
Labeling
Type Code
Option II*
Options I**
