PFT ROTOQUIRL II/ PFT ROTOMIXSafety - Overview - Operation - Spare parts lists
Preparation
30
2016-08-26
20.3 PFT ROTOMIX assembly
Fig.24 Rotomix assembly
Place the mixing impeller (1) in the housing (5).
Place the cover with the O-ring (2) on the housing
(5) (support for the pump above in Fig. 16).
Screw the nuts (3) to the tie rod (4).
Screw the tie rod (4) in the housing and secure
with nuts (6).
Screw the coupling 35 M-part (7) to the housing.
Attach the coupling reduction (8) to the coupling
(7).
Attach the pump system (tang of the rotor must
be in the support of the mixing impeller, Fig. 25).
Fig.25 Top support
Fig.26 Rotor tang in the Rotomix mixing impeller
3
2
4
1
5
6
7
8
