PFT ROTOQUIRL II/ PFT ROTOMIXSafety - Overview - Operation - Spare parts lists
Preparation
2016-08-26
31
20.4 PFT ROTOQUIRL II assembly
8
1
3
6
7
5
1
4
2
10
Fig.27 Rotoquirl assembly
Place the mixing impeller (1) in the housing (2).
Place the cover (3) with the O-ring (4) on the housing (2) (support for the pump).
Place the lock ring (5) between the cover (3) and housing (2).
Fit the lock ring (5) with a screw (6) to the cover (3).
Brace the lock ring (5) by tightening the collar nut (7).
Screw on the nut M 16 (8) to the tie rod (9) (approximately up to the centre of the thread)
Screw the tie rod (9) in the housing (2) and secure it (8).
Screw the coupling 35 M-part (10) to the housing (2).
