PFT ROTOQUIRL II/ PFT ROTOMIXSafety - Overview - Operation - Spare parts lists
Environmental protection
42
2016-08-26
30 Environmental protection
Observe the following notes on environmental protection when
carrying out maintenance works:
Remove the discharged, exhausted or surplus grease at all greasing points that are
lubricated manually and dispose of it in accordance with the local applicable regulations.
31 Disassembly
After the useful service life has been reached, the device has to be
dismantled and disposed of in an environment-friendly manner.
31.1 Safety
Personnel
Disassembly must be carried out only by specially trained
technical personnel.
Work on the electrical system must be carried out by qualified
electricians only.
Basic information
WARNING!
Risk of injury in case of improper disassembly!
Stored residual energies, sharp components, points or
edges at and inside the device or on the required tools
might cause injuries.
Therefore:
– Prior to starting the works ensure that there is sufficient
space.
– Carefully handle components with sharp edges.
– Ensure order and cleanliness at the working place!
Loose components and tools on top of one another or
lying about pose potential accident risks.
– Dismantle components correctly. Pay attention to partly
high dead weight of the components. If required use
lifting equipment.
– Secure components so they do not fall down or fall over.
– In case of doubt, consult the dealer.
