PFT ROTOQUIRL II/ PFT ROTOMIXSafety - Overview - Operation - Spare parts lists
Disassembly
2016-08-26
43
Electrical system
DANGER!
Danger of death from electric current!
There is danger to life if you come in contact with live parts.
Activated electrical components can carry out uncontrolled
movements and cause serious injuries.
Therefore:
– Prior to beginning the disassembly, switch off the power
supply and finally disconnect it.
31.2 Disassembly
Clean the device for phasing out and disassemble under
observance of applicable health and safety rules as well as
environmental regulations.
Prior to starting the disassembly:
Switch off device and secure against restarting.
Physically separate the complete energy supply from the
device, discharge stored residual power.
Remove operating supplies as well as remaining processing
materials and dispose of them in an environment-friendly way.
31.3 Disposal
If no agreement for the recovery or the disposal was made, recycle
the disassembled components:
Scrap metals.
Recycle plastic elements.
Dispose of remaining components, sorted according to the type
of material.
ATTENTION!
Environmental damage in case of incorrect
disposal!
Waste from electronic and electrical equipment,
electronic components, lubricants and other
auxiliary materials are subject to hazardous waste
treatment and must be disposed of by specialised
companies only!
The local authority or special waste management operators can
supply information on environment-friendly disposal.
