PFT G 54 E
Operating Instructions
09/2006
Knauf PFT GmbH & Co.KG
29
Accessories
PFT injection hood E1 for G 54 E (item no. 20 60 02 13)
The PFT injection hood is used to fill the mixer pump with dry material with the
PFT SILOMAT pneumatic conveying system.
PFT delivery hood with electrical safety cabinet for G 54 E
(item number 20 60 05 00)
The PFT delivery hood is used to fill the PFT
G 54 E
mixer pump with dry
material directly from the silo or container. If the material hopper is reported to
be empty, the mixer pump is switched off by means of the remote control plug.
ROTOMIX D pumps, cpl. with 35 coupling and reducer
(item number 20 11 80 00)
Agitator for the improved solubilisation and mixing of the material. Direct drive
via the rotor tangs. Volume of approx. 1.2 l
All guidelines of the material manufacturer must be observed.
ROTOQUIRL II, cpl. (LW34 coupling), volume of 4.2 l
(item number 20 11 84 00)
Agitator for the improved solubilisation and mixing of the material. Direct drive
via the rotor tangs. Volume of approx. 4.2 l
All guidelines of the material manufacturer must be observed.
Star wheel spacer for coarse plaster (item no. 20 10 19 00)
Increases the distance between the star wheel and the base of the material
hopper by 3 mm.
Nozzle for water intake with Geka coupling (item no. 20 21 58 00)
For the improved injection of water into the mixing area in the event of a low
water factor.
