PFT G 54 E
Operating Instructions
09/2006
Knauf PFT GmbH & Co.KG
3
Dear Customer,
Congratulations on your purchase. You have made a wise choice, since the quality you appreciate
is of a brand from a company with a name that exemplifies quality.
The PFT G 54 E is a state-of-the-art mixer pump. It has been designed in a task-optimised way in
order to be a reliable aid in rough construction site conditions.
These operating instructions should always be kept at the site of the machine so that they are
always readily available. They contain information on the various functions of the appliance. Study
the operating instructions thoroughly before putting the machine into service, since we assume no
liability for accidents or damage caused by incorrect operation.
The PFT G 54 E mixer pump will be a reliable aid if it is operated properly and handled with care.
Initial inspection after delivery
An important task of all technicians delivering the PFT G 54 E mixer pump is the inspection of the
machine settings at the end of the first work cycle. The factory settings may change during the
initial operation cycle. Malfunctions can be expected if these changes are not corrected in time,
immediately after putting the mixer pump into service.
The following inspections and settings should be made by the technician about two service hours
after handing over the PFT G 54 E mixer pump and giving appropriate instructions:
¾
Water safety switch
¾
Pump pressure, backpressure
¾
Air safety switch
¾
Pressure
reducer
