PFT G 54 E
Operating Instructions
09/2006
Knauf PFT GmbH & Co.KG
5
Intended use
The PFT G 54 E is a continuously operating mixer pump for pre-mixed machinable mortar with a
grain size of up to 3 mm. The PFT G 54 E can also be used to pump pasty materials.
Observe all processing guidelines from the material manufacturer.
Operating principle
The material hopper of the PFT G 54 E mixer pump is filled with ready-mix dry mortar
(from bags or with delivery hood or injection hood).
The diagonal star wheel conveys the ready-mix dry mortar into the mixing tube.
The motor, which drives the mixing shaft and pump unit, is situated on the mixing tube. The ready-
mix dry mortar is mixed and water is added to it in the mixing tube.
It is pumped into the material hose by the screw pump.
Please observe the processing guidelines of the material manufacturer.
The machine consists of portable individual components of small, handy dimensions and light
weight that allow fast, convenient transport.
The following points should be observed during operation:
¾
Worksite power – control box connection
¾
Control box – pump motor connection
¾
Control box – compressor connection
¾
Compressor – air manifold connection
¾
Water supply – water manifold connection
¾
Air manifold – air hose connection
¾
Air hose – spraying gun connection
¾
Mixing tube – mortar pressure gauge connection
¾
Mortar pressure gauge – mortar hose connection
¾
Mortar hose – spraying gun connection
