Mixing pump RITMO L / RITMO M Overview - Operation
Examination
2016-02-17
7
2 Examination
2.1 Examination by machine operator
Prior to each shift, the machine operator has to examine the
effectiveness of the control and safety devices as well as the proper
fitting of the protection devices.
The safe working condition of construction machinery has to be checked
by the machine operator during operation.
If the safety devices show any defects or if any other defects are detected
that compromise a safe operation, the supervisor has to be informed
immediately.
In case of defects that cause harm to persons, the operation of the
construction machine has to be stopped to eliminate the defects.
2.2 Periodic inspection
Construction machinery has to be inspected for their safe working
condition in accordance with the operating conditions and the operational
requirements as needed, however at least once a year by an expert.
Pressure vessels have to undergo the prescribed expert inspections.
The inspection results have to be documented and kept at least until the
next inspection.
3 General information
3.1 Information regarding the operating manual
This operating manual gives important information on handling the
device. A prerequisite for safe working is the observance of all stated
safety guidelines and instructions.
Furthermore the local accident prevention guidelines and general safety
instructions for the application area of the device are to be adhered to.
Read the operating manual thoroughly before starting any work! It is a
part of the product and has to be kept near the tool and easily accessible
to the staff at all times.
If the tool is given to third parties, also include the operating manual.
The figures in this manual are for presentation purposes of facts not
necessarily to scale and may slightly differ from the actual model of the
device.
