HOT WIRE CUTTING TOOL Overview - Operation - Spare parts lists
Advantages of PFT CUTMASTER
29.07.2013
Page 15
5 Advantages of PFT CUTMASTER
The PFT CUTMASTER folds flat and is therefore lightweight and
can be transported and stored in a space-saving way.
Folding feet enable you to work at two working heights (only for
1100/310). The lowered working positions can be helpful e.g. in
confined space conditions in the topmost lift on a scaffold.
The combo base plate on the rear serves as admission for the
integrated support foot or for attachment of a scaffold.
The stainless steel protective bow is welded on both sides onto the
swivel units. The clamp below serves to protect the spiral cable.
The clamp above can be used as eyelet for transport by crane
(only for 1100/310).
The fixed mounted transformer facilitates a high cutting speed and
an extremely short heating-up time. The transformer is doubly
protected. A thermal fuse is integrated against overheating and a
replaceable micro fuse against short-circuit currents.
A push button, integrated in the cutting bow, reduces the danger of
injury from a hot wire and extends the service life of the hot wire.
The welded cutting bow prevents the product from getting tilted
during process of cutting.
By the depth stops which are positioned at the hangers, you can
fix the cutting depth.
All straight edges are extremely scrub resistant and recessed at
the ground plate and the support brackets.
For angular cuts, a patented “memory device” guarantees rational
cutting of e.g. rake angle cuts.
Thanks to a second support angle, a second slanted position is
possible and furthermore, a fall down of the cut parts is avoided.
Also in folded position, hot wire cutting tool stands on the
individual feet – no scratches.
Thanks to its sturdy lightweight design, the PFT CUTMASTER
only weighs 17 kg (1100/310) or 16.5 kg (1300/310).
