HOT WIRE CUTTING TOOL Overview - Operation - Spare parts lists
Preparation
29.07.2013
Page 37
22.2 Operating condition CUTMASTER 1300/310
Fig. 22: Operating condition
Tighten the spring pin (1) on the rear on both the sides and fold the
feet downwards. Ensure that the spring pins are locked.
Open the feet and lean PFT CUTMASTER against a wall, ensuring it
does not fall down.
22.3 Position in the open CUTMASTER 1100/310
Fig. 23: Free position
An additional foot can be installed on the assembly plate (1) on the
rear of PFT CUTMASTER (Accessory article number 00257132)
for free-standing work.
Likewise, a frame bracket can be mounted (accessory article
number 00271358).
22.4 Position in the open CUTMASTER 1300/310
Fig. 24: Free position
Loosen the three-winged nuts (1) on the rear and attach the
support foot.
Tighten the three-winged screws again.
Likewise, a frame bracket can be mounted (accessory article
number 00271358).
1
1
1
1
