HOT WIRE CUTTING TOOL Overview - Operation - Spare parts lists
Disassembly
Page 46
29.07.2013
28 Disassembly
After the useful service life has been reached, the device has to be
dismantled and disposed off in an environmental-friendly manner.
28.1 Safety
Personnel: Disassembly
Disassembly must be carried out only by specially trained
technical personnel.
Work on the electrical system must be carried out by qualified
electricians only.
Basic information
WARNING!
Risk of injury in case of improper disassembly!
Stored residual energies, sharp components, points or
edges at and inside the device or at the required tools
might cause injuries.
Therefore:
– Prior to starting the works ensure that there is sufficient
space.
– Carefully handle components with sharp edges.
– Ensure order and cleanliness at the working place!
Loose components and tools on top of another or lying
about pose potential accident risks.
– Dismantle components correctly. Pay attention to partly
high dead weight of the components. If required use
lifting equipment.
– Secure components that they do not fall down or fall
over.
– In case of doubt, consult the dealer.
Electrical system
DANGER!
Danger of death from electric current!
There is danger to life if you come in contact with live parts.
Activated electrical components can carry out uncontrolled
movements and cause serious injuries.
Therefore:
– Prior to beginning the disassembly, switch off the power
supply and finally disconnect it.
