PFT ZP 3 L MULTIMIX Overview – Operation – Spare Parts Lists
Safety systems air compressor
2016-07-04
17
14 Safety systems air compressor
WARNING!
Danger of death due to non-functioning
safety equipment!
Safety equipment ensures highest level of
safety in operation. Even if work processes
become a little more complicated due to safety
equipment,
they
must
never
be
decommissioned. The safety is guaranteed
only with intact safety equipment.
Therefore:
Before starting work, check if the safety
equipment is functioning properly and has
been correctly installed.
Use safety equipment at all times.
Do not obstruct access to safety systems
such as emergency stop buttons, pull cords
etc.
14.1 General positioning of the air compressor
The air compressor complies with the national and international
safety regulations and can therefore also be used in damp
rooms and/or outdoors. Areas with clean and dry air should be
preferred. Ensure that the device can freely suck in the air.
This applies in particular if an installation is intended.
The air compressor should only be set up in such a way that no
dangerous additives, such as solvents, vapours, dusts or other
harmful substances can be sucked in. The device should be
positioned only in rooms where the hazard of a potentially
explosive atmosphere is not given.
14.2 Hot surface of the air compressor
General information
WARNING!
Danger of injury due to hot surface!
During operation the compressor can reach a
surface temperature of up to 100 °C.
Therefore it has to be ensured that the device
does not get into contact with bare body pars
during use as well as for some time after use,
in relation to the heating temperature.
