PFT ZP 3 L MULTIMIX Overview – Operation – Spare Parts Lists
2016-07-04
19
17 Material
17.1 Flow characteristics
NOTE!
The 2L6 pump can be used with an operating pressure of up to 20 bar.
The minimum conveying distance depends mainly on how the material flows.
It is recommended to reduce the length of the mortar hose if you exceed an operating
pressure of 20 bar.
To avoid machine breakdowns and excessive wear on pump motor, pump shaft and
pump, always use original PFT spare parts such as:
PFT - Rotors
PFT - Stators
PFT - Mixing unit
PFT - Material hoses.
These components are compatible with one another and form a single constructive unit
together with the machine.
Failure to follow these recommendations will result not only in the voiding of the warranty,
but the quality of the mortar you are producing will also suffer.
18 Mortar pressure gauge
Important!
For reasons of safety, the use of a mortar pressure
gauge is recommended.
Fig. 19:
Mortar pressure gauge
PFT- PFT mortar pressure gauge
Benefits of the mortar pressure gauge:
Exact regulation of correct mortar consistency.
Constant monitoring of correct conveying pressure.
Early detection of clogging or overloading of pump motor.
Produces zero pressure.
Contributes significantly to the safety of operating personnel.
Long lifespan for PFT pump components.
19 Safety regulations
Important!
When performing any work, observe the regional
safety regulations for mortar conveying and
spraying machines!
