PFT ZP 3 L MULTIMIX Overview – Operation – Spare Parts Lists
Switching on the MULTIMIX and putting it into service
2016-07-04
29
28 Switching on the MULTIMIX and putting it into service
Fig. 38: Turn on the main switch
1. Open the tap (1) and allow the required quantity of water to flow
into the material hopper.
2. Close the tap again.
3. Turn the main switch (2) to the “I” position.
28.1 Hazardous dust
Fig. 39: Dust mask
WARNING!
Inhaled dust can lead to long-term lung damage or other
health problems.
NOTE!
The machine operator or the person working in the dusty
area must always wear a dust mask when filling the
machine.
The decisions of the Committee for Hazardous Materials
(AGS) can be read in the Technical Rules for Hazardous
Substances (TRGS 559).
28.2 Filling the MULTIMIX with material
Fig. 40: Bagged material
Filling with construction site mixture or bagged material.
Filling with bagged material:
DANGER!
Risk of injury from bag opener!
Sharp edges of the bag opener pose a risk of injury.
- Wear safety gloves.
NOTE!
Do not switch off the mixer when the mixing drum is full
or during the mixing procedure.
Granulate larger than 6 mm should not be put in the
material hopper!
This could cause the machine to block.
1
2
