PFT ZP 3 L MULTIMIX Overview – Operation – Spare Parts Lists
Maintenance ZP 3 L
46
2016-07-04
Fig. 75: Danger of frost
1. Remove the hose (1) from the water inlet.
2. Open the tap (2).
40 Maintenance ZP 3 L
40.1 Safety
Personnel
Unless otherwise stated, the maintenance work detailed here can
be carried out by the machine operator.
Some tasks may only be carried out by specially trained personnel
or only by the manufacturer.
Work on electrical systems must always only be carried out by
qualified electricians.
Basic information
WARNING!
Danger of injury due to improperly performed
maintenance work!
Improper maintenance can lead to serious injuries or
equipment damage.
Ensure there is adequate space for assembly
before starting any work.
Keep the assembly area clean and tidy.
Unattached components or tools left lying around
or stacked on one another can cause accidents.
If components have been removed, ensure that
they are installed again correctly, reattach all
fastening elements and adhere to the specified
screw tightening torques.
Electrical system
Fig. 76: Removing the connection
cable
DANGER!
Danger of death due to electric current!
Contact with live components can lead to death or
serious injury. Live electrical components can move
uncontrollably and cause serious injury.
Therefore:
Before starting work, switch off the electrical power
supply and secure it against being switched back on
again.
Interrupt the power supply by removing the
connection cable.
2
1
