PFT ZP 3 L MULTIMIX Overview – Operation – Spare Parts Lists
Maintenance ZP 3 L
2016-07-04
47
Securing against restarting
DANGER!
Danger of death due to unauthorised restarting!
When working on malfunctions, there is a danger of
unauthorised switching on of the electrical supply.
This puts those in the danger area at extreme risk.
Therefore:
Before starting work, switch off all electrical power
supplies and secure them against being switched
back on again.
40.2 MULTIMIX Maintenance tasks
Provided no increase wear can be identified during regular
inspections, reduce the required maintenance intervals as
appropriate for the actual signs of wear.
For questions regarding maintenance tasks and intervals,
contact the manufacturer (see service address on page 2).
40.3 Setting the mixing arm
Fig. 77: Open Protective grille
WARNING!
Danger from falling of the protective grille!
Secure protective grille with bolts (1).
1. Clean turning bolt regularly and lightly grease.
Fig. 78: Setting the mixing arm
2. The interval between the scraper and the material hopper
should total 1.5 times the granulate size.
2
1
