PFT ZP 3 L MULTIMIX Overview – Operation – Spare Parts Lists
Maintenance ZP 3 L
2016-07-04
49
40.6 Lubricating the sealing unit
1
2
Fig. 80: Lubrication
Lubricate the seal for the material hopper on a weekly basis (1).
Lubricate the gearbox seal monthly (2).
40.7 Compressor air filter
Performed by operator.
2
1
Fig. 81: Compressor filter
1. Unscrew the filter cover.
2. Remove the filter.
3. Blow out the filter from the inside to the outside, or tap it out.
4. Replace the filter if dirt is severe.
5. Insert the filter with the rigid side of the filter (2) facing inwards.
Filter insert D=100 item number 20134000
Fig. 82: Filter cover opening
6. Unscrew the filter cover.
NOTE!
The filter cover opening is at the bottom.
40.8 Environmental protection
Observe the following environmental protection guidelines
when carrying out maintenance work:
Remove used, leaking or excess grease from all manual
lubrication points and dispose of it correctly according to
the applicable local regulations.
Collect used oil in suitable containers and dispose of it
according to the applicable local regulations.
