Mixing pump RITMO XL FC-230/400V / Part 2 Overview, operation and service
Transport, packing and storage
3.4
Closing the motor tilt flange
2
1
Figure 6: Closing the motor tilt flange
CAUTION
Danger of crushing at the motor tilt flange!
There is a danger of crushing injuries when closing the
motor tilt flange.
Never reach into the closing range of the motor tilt
flange.
1. Close the motor tilt flange (1) and lock with the quick closure (2).
3.5
Crane transport
1
1
Figure 7: Attachment points
Attachment points
Anchor the machine at the anchor points (1) for transport by crane.
Observe the following conditions:
The crane and lifting equipment have to be designed for the weight
of the packages.
The operator has to be authorised to operate the crane.
Attachment:
1. Anchor the hooks to the crane hooks accordingly.
2. Ensure that the package is straight, possibly observe eccentric
centre of gravity.
3.6
Transport in individual parts
1
Figure 8: Opening the rotary bolt
To make transport easier, disassemble the machine into its individual
components. Into the units mixing tube with material hopper and
pump, gear motor with tilt flange and chassis.
1. Release cable and hose connections.
2. Open rotary bolt (1).
3. Remove mixing tube with material hopper from the chassis.
page 18 / 76
