Mixing pump RITMO XL FC-230/400V / Part 2 Overview, operation and service
Transport, packing and storage
3.2
Transport inspection
On receipt check the delivery immediately for completeness and trans-
port damage.
In case of externally visible transport damage, proceed as follows:
Do not accept the delivery or under reserve only.
Note the extent of damage on the transport documentation or on
the delivery note of the carrier.
Initiate complaint process.
NOTE
Report any defect as soon as it is detected. Claims for
damages can be asserted only within the valid warranty
period.
3.3
Packaging
For packaging
The individual packages have to be packed in accordance with the
transport conditions to be expected. Only environmentally-friendly
materials were used for the packaging.
The packaging should protect the individual components until the
assembly from transport damage, corrosion and other damage. There-
fore do not destroy the packaging and remove only shortly before the
assembly.
Handling packaging materials
If no agreement for the recovery of the packaging has been made,
separate materials according to type and size and reuse or recycle.
NOTE
Environmental damage due to incorrect disposal!
Packaging materials are valuable raw materials and in
many cases they can be reused or reconditioned and
recycled.
Dispose of packaging materials in an environmen-
tally-friendly way.
Observe the applicable local disposal regulations. If
required hand over the disposal to a specialist.
page 17 / 76
